What are the differences in cutting performance between Resin Grinding Wheel Cutting Discs of different grits?
Publish Time: 2024-09-25
Resin Grinding Wheel Cutting Discs are widely used in industrial production, and there are significant differences in cutting performance between cutting discs of different grits.Resin Grinding Wheel Cutting Discs with coarser grits have relatively strong cutting capabilities. Coarse-grained cutting discs have larger surface abrasives, which can quickly remove materials during the cutting process and are suitable for rough processing of workpieces with higher hardness and greater thickness. However, the surface of coarse-grained cutting discs after cutting is relatively rough, and may leave obvious cutting marks, requiring further processing. Moreover, the vibration and noise generated by coarse-grained cutting discs during use are relatively large, which has a more obvious impact on operators and equipment.In contrast, Resin Grinding Wheel Cutting Discs with finer grits show higher precision and finish in cutting performance. Fine-grained cutting discs have smaller abrasives and can perform fine cutting, making the surface of the workpiece smooth and flat after cutting without excessive subsequent processing. However, the cutting speed of fine-grained cutting discs is relatively slow, and it may take a long time to complete the cutting of thicker or harder workpieces. In addition, fine-grained cutting discs may not be as durable as coarse-grained cutting discs and need to be replaced more frequently.In practical applications, the Resin Grinding Wheel Cutting Disc with the appropriate grain size should be selected according to the specific cutting needs. If you pursue efficient roughing, you can choose a coarse-grained cutting disc; for cutting operations that require high precision and high-quality surfaces, fine-grained cutting discs should be given priority. At the same time, factors such as the material, thickness, and hardness of the workpiece, as well as the performance of the equipment and the safety of the operator, need to be considered to ensure that the selected cutting disc can achieve the best cutting performance and improve production efficiency and product quality.
